How to Tie the Bottom of a Trampoline Net: Secure It Like a Pro

Why Securing the Trampoline Net Bottom Is Essential for Safety

Trampoline nets are designed to keep jumpers safe, but if the bottom isn’t tied properly, gaps can form. These gaps pose significant risks, especially for young children who might slip under the net. A properly tied trampoline net bottom prevents accidents by eliminating openings between the net and the jumping mat. Before discussing techniques, note that many modern nets come with built-in loops for easy anchoring. If yours doesn’t have loops, you’ll need manual methods, such as using zip ties or bungee cords. Always check manufacturer guidelines for your specific net model before proceeding.

Common Methods to Secure the Net Base

The most reliable approach involves attaching the net’s bottom edge to the frame or mat. For nets without loops, use heavy-duty zip ties. Feed the ties through the net’s bottom holes (if available) or directly loop them around the frame poles. How To Tie Bottom Of Trampoline Net effectively often requires pairing zip ties with bungee cords for extra tension. For models with sewn-in loops, thread the loops around the frame and secure them with plastic clips. Avoid knots—they can come undone under pressure—and opt for locking mechanisms.

Using Zip Ties and Bungee Cords for a Tight Seal

Gather zip ties (at least 12-inch length) and two bungee cords. Insert a zip tie through the net’s edge and around the frame pole, then pull tight. Repeat every 12–18 inches around the perimeter. For the bungee cords, stretch them horizontally along the bottom edge, hooking them to the frame legs. This method prevents the net from sagging. If your net touches the ground, anchor it with trampoline net weights or sandbags to maintain a secure seal.

Step-By-Step Process for Tying the Net Base

Prepare Your Tools and Inspect the Net

You’ll need zip ties, a ladder, gloves, and possibly new replacement bungee cords. First, inspect the net for holes or wear—if any structural damage exists, replace the net. Place the trampoline on flat ground; secure it using wind stakes. If the net has elastic loops at the bottom, clip them directly onto the frame. For tie-string models, thread the string through the frame’s anchor points while pulling the net taut.

Tie the Bottom Securely

Begin at the net’s entrance point or door. Use the leftover string (or new zip ties—see our recommended supplies) to create a double-knot around the frame. Work your way clockwise, tugging the net to remove any slack. If your net has spacing gaps, use additional bungee straps to cinch tight. Finally, test the net by pressing outward—there should be no gap between the net and mat. Re-check all ties monthly for loosening.

Frequently Asked Questions About Trampoline Net Bottom Maintenance

How often should I check the net’s bottom ties?

Inspect ties at least monthly, as seasonal changes can loosen